Q&A with Guido Locatelli
Tell us about your company.
The company was established in 1984 near Milan, Italy, in the city of Caravaggio, and since its inception the headquarters...
Q&A with Steve Mueller
Now that you are with Linde, what’s a typical day like for you?
We (Praxair) merged with Linde, and we are now all under the...
Q&A with Stephen Harris
Tell us about the new Bodycote Elgin, Illinois, facility. When did it become fully operational?
We are very pleased to announce that our brand-new Elgin...
Q&A with Andrew Bassett
You recently launched your Aerospace Compliance Software. How does it work?
Aerospace Compliance Software is a brainchild of ours. The software eliminates human errors of...
Q&A with Jeff Rissman
You’re the lead author on the report, “Thermal Batteries: Decarbonizing U.S. Industry While Supporting A High-Renewables Grid.” What is your background, and what were...
Q&A with Tom Baldock
What you do at Guill Tool?
My responsibilities here are for sales in the aerospace area. I’ve been in sales most of my adult life,...
Q&A with Rick Diekman
Owner and President of Controlled Thermal Processing, Inc.
Q&A with Joe Ugalde
Business Marketing Analyst with TE Wire & Cable, LLC
Q&A with Adam Jacobson
What’s a typical day like for you at JN Machinery?
We’re a small company, so, it really depends on what’s going on as far as...
Q&A with Brian Russell
Q: Tell me a little about the history of Dry Coolers, Inc.
We started in 1985 to provide cooling water solutions for heat treating equipment—for...
Q&A with Joe Coleman
What Is CMMC 2.0?
CMMC stands for Cybersecurity Maturity Model Certification. CMMC 2.0 is a contractual requirement for any non-federal organization or system that is...
Q&A with John Niggle
What’s a typical week like for you at Pelican Wire?
Pelican is a custom wire manufacturer, and for that reason, it is a little difficult...
Q&A with Shlok Sundaresh
What is your role at TS USA?
I joined TS USA, HEF Group, in 2014 as a process engineer for its Springfield, Ohio, facility. As...
Q&A with Daniel Reardon
What is Abbott Furnace's mission?
Our mission is to be the market leader in the design, production, and service of continuous process industrial furnaces. And...
Q&A with John Ludeman
Advanced Heat Treat Corp recently renewed its Nadcap accreditation in heat treating. Why was this important?
It is important to Advanced Heat Treat to have...
Q&A with Keith Boeckenhauer
What is your background?
I have an engineering degree from the University of Missouri and I’ve been with Seco/Warwick since 1984, working in sales, engineering,...
Q&A with Andrew Storey
What’s a typical week like for you?
I’m the technical person who works on a specific group of products on the sales side of...
Q&A with Chuck Faulkner
What makes attending Heat Treat 2021 an important activity for heat treaters?
ASM Heat Treat 2021 is one of the premier events globally for the...
Q&A with Peter Caine
What is your role with HeatTek and what’s a typical week like?
My position at HeatTek is director of Custom Products. Our custom products division...
Q&A with Diane Haggerty
What makes PowderMet2023 and AMPM2023 important events within the industry?
As the premier powder metallurgy (PM) events in the Americas, the annual PowderMet (International Conference...
Q&A with Tom Schulz
What makes the L&L model XLE214 floor standing box furnace ideal for the aerospace industry?
L&L Special Furnace has grown to establish a major...
QA with Raymond Daniel Noble
What are your duties with Noble Industrial Furnace? What is your typical day?
My duties include, but are not limited to, oversight of design and...
Q&A with Matt Clinite
Tell us about Ipsen U and what it can do for heat treaters.
The Ipsen U class provides a great learning experience for everyone from...
Q&A with Jeff Opitz
Tell us about GraphiteInsulation.com?
GraphiteInsulation.com is a vehicle for us to narrow our focus to graphite insulating products, mostly used for vacuum heat treatment...
Q&A with George Barbour
Please tell us a little about Heavy Carbon Co.
The company began in 1995 as an idea for carburizing steel at a cleaner, faster rate...
Q&A with Jeff Marshall
What does Metallurgical High Vacuum Corporation do for the industry?
We remanufacture pumps. That’s probably the core of our business, but that’s changing because of...
Q&A with Mike Grande
Wisconsin Oven recently shipped a horizontal spray quench furnace to C/A Design in Dover, New Hampshire. What makes quenching important to this company?
Any time...
Q&A with Andrew Bassett
How did ATP get started?
During the early 1990s, the National Aerospace and Defense Contractors Accreditation Program (Nadcap) began embracing all special processes, and we...
Q&A with Bill St. Thomas
Please tell us a little about your background.
I started in the heat treating industry back in the late 1960s working for one of my...
Q&A with John Ludeman
Advanced Heat Treat Corp. (AHT) recently renewed its Nadcap accreditation in heat treating. What makes the Nadcap accreditation important to what AHT does?
Nadcap is...
Q&A with Sławomir Woźniak
You recently attended ThermProcess in Dusseldorf. What kind of reactions to your products did you get from the attendees?
It was quite a good event...
Q&A with Matthias Pascher
What is your role at Buehler?
I am the product manager for our hardness testing equipment within Buehler.
Buehler is a global supplier of apparatus for...
Q&A with Jeff Marshall
What does MHV do for the heat-treat industry?
We make our customers more competitive, which is good both for the customers and for the industry...
Q&A with David Hamling
What’s a typical week like for you at ZIRCAR Ceramics?
I drive the company’s sales and marketing efforts and usually begin my day with a...
Q&A with Heat Treat 2019 attendees
HEAT TREAT 2019, is scheduled to hit Detroit, Michigan, October 15–17. The show will bring thousands of industry experts and insiders to the motor...
Q&A with David Wolff
What’s a typical day like for you at Nel Hydrogen?
I’m in field sales and work with customers to make sure their process needs that...
Q&A with Joe Stambaugh
Pease tell us a little about your background and company.
My education was in electromechanical technologies. I have spent my 40-year career working in the...
Q&A with Greg Jennings
What’s a typical day like for you at Wisconsin Oven?
My typical day is quite a bit of fun. I’ve got three kids, and it’s...
Q&A with Tom Morrison
When did you make the decision to take FNA virtual?
Our Executive Committee has been meeting weekly since April when COVID-19 really started to take...
Q&A with Robert Antolik
What’s a typical day like for you at Applied Test Systems (ATS)?
Things have changed quite a bit lately due to COVID-19. But, in general,...