Q&A with Roseanne Brunello
What do you and Mountain Rep do for the heat-treat industry?
Mountain Rep is a manufacturing rep firm that has been in business for 35...
Q&A with Michael Hager
What’s a typical day like for you at Verder Scientific/Carbolite Gero?
Our office here in North America is primarily focused on sales, technical support, and...
Q&A with Greg Jennings
What’s a typical day like for you at Wisconsin Oven?
My typical day is quite a bit of fun. I’ve got three kids, and it’s...
Q&A with Chris Stevens
What’s a typical day like for you at Dalton Electric?
It starts and ends with our customers. Our value proposition to our Dalton users is...
Q&A with Robert Antolik
What’s a typical day like for you at Applied Test Systems (ATS)?
Things have changed quite a bit lately due to COVID-19. But, in general,...
Q&A with Guido Locatelli
Tell us about your company.
The company was established in 1984 near Milan, Italy, in the city of Caravaggio, and since its inception the headquarters...
Q&A with Joe Grein
Tell our readers a little bit about Thermalogic.
At Thermalogic, we’re celebrating our 50th year in business this year. We were founded in 1971 in...
Q&A with Adam Jacobson
What’s a typical day like for you at JN Machinery?
We’re a small company, so, it really depends on what’s going on as far as...
Q&A with Jeff Opitz
Tell us about GraphiteInsulation.com?
GraphiteInsulation.com is a vehicle for us to narrow our focus to graphite insulating products, mostly used for vacuum heat treatment...
Q&A with Heat Treat 21 attendees
HEAT TREAT 2021 is scheduled to hit St. Louis, Missouri, September 14-16. The show will bring thousands of industry experts and insiders to the...
Q&A with Susan Heinauer
Thermal Processing welcomes its newest sales representative to its staff, Susan Heinauer. She has more than 20 years of experience in sales and promises...
Q&A with Andrew Storey
What’s a typical week like for you?
I’m the technical person who works on a specific group of products on the sales side of...
Q&A with Aziz Jamaluddin
What is Epcon?
Epcon is a full-service organization, starting with front-end business development/marketing, sales and application engineering, through complete in-house engineering, design, and drafting —...
Q&A with Joe Coleman
What Is CMMC 2.0?
CMMC stands for Cybersecurity Maturity Model Certification. CMMC 2.0 is a contractual requirement for any non-federal organization or system that is...
Q&A with Lauren Jones
Why is it important to invest in the future of heat-treating?
Nearly every metal component undergoes some type of heat-treating application. Vacuum furnaces contribute to...
Q&A with Jeff Rissman
You’re the lead author on the report, “Thermal Batteries: Decarbonizing U.S. Industry While Supporting A High-Renewables Grid.” What is your background, and what were...
Q&A with Bill Stuehr
Please tell us how Induction Tooling began.
In 1975, I was working as a process design engineer with a local commercial heat treating company. Several...
Q&A with Andrew Bassett
How did ATP get started?
During the early 1990s, the National Aerospace and Defense Contractors Accreditation Program (Nadcap) began embracing all special processes, and we...
Q&A with John Ludeman
Advanced Heat Treat Corp recently renewed its Nadcap accreditation in heat treating. Why was this important?
It is important to Advanced Heat Treat to have...
Q&A with Jeff Marshall
What does Metallurgical High Vacuum Corporation do for the industry?
We remanufacture pumps. That’s probably the core of our business, but that’s changing because of...
Q&A with Joe Stambaugh
Pease tell us a little about your background and company.
My education was in electromechanical technologies. I have spent my 40-year career working in the...
Q&A with Sławomir Woźniak
You recently attended ThermProcess in Dusseldorf. What kind of reactions to your products did you get from the attendees?
It was quite a good event...
Q&A with Tom Schulz
What makes the L&L model XLE214 floor standing box furnace ideal for the aerospace industry?
L&L Special Furnace has grown to establish a major...
Q&A with Tom Morrison
When did you make the decision to take FNA virtual?
Our Executive Committee has been meeting weekly since April when COVID-19 really started to take...
Q&A with Steve Mueller
Now that you are with Linde, what’s a typical day like for you?
We (Praxair) merged with Linde, and we are now all under the...
Q&A with Raymond Daniel Noble
Noble is expanding its services. In what way are you expanding?
We’ve been working on a service expansion called Noble 1-Stop. We have begun working...
Q&A with Dr. Mark Cross
The automotive industry is continually pushing new boundaries. Advancements in engineering technology show no signs of slowing down with increasing developments in manufacturing processes....
Q&A with Turgay Ozan
Busch Vacuum Solutions USA, one of the largest manufacturers of vacuum pumps, blowers, compressors, and systems, has acquired Jennings Associates Inc., a distributor for...
Q&A with Don Selmi
What is Premier’s mission?
To provide heat-treating systems that are dependable as well as innovative, with performance-proven technology that will enhance the physical properties and...
Q&A with Brian Kelly
What do you do at Honeywell?
I’m part of Honeywell Thermal Solutions. We’re a group of companies that Honeywell has acquired over the last couple...
Q&A with Justin Sims
Who is Dante Solutions, and what do you do with the company?
Dante Solutions is an engineering company with a main focus on improving heat...
Q&A with Niall Sweeney
In which particular product area has Super Systems observed an increase in demand over the past couple of years?
One particular area we have experienced...
Q&A with Bill St. Thomas
Please tell us a little about your background.
I started in the heat treating industry back in the late 1960s working for one of my...
Q&A with Raymond Daniel Noble
What are your duties with Noble Industrial Furnace? What is your typical day?
My duties include, but are not limited to, oversight of design and...
Q&A with David Wolff
What’s a typical day like for you at Nel Hydrogen?
I’m in field sales and work with customers to make sure their process needs that...
Q&A with Brian Russell
Q: Tell me a little about the history of Dry Coolers, Inc.
We started in 1985 to provide cooling water solutions for heat treating equipment—for...
Q&A with Jeff Marshall
What does MHV do for the heat-treat industry?
We make our customers more competitive, which is good both for the customers and for the industry...
Q&A with Stephen Harris
Tell us about the new Bodycote Elgin, Illinois, facility. When did it become fully operational?
We are very pleased to announce that our brand-new Elgin...
Q&A with Max Dubin
What’s a typical day like for you at Across International?
As sales development, I act as the intersection between the products our engineers design, our...
Q&A with Tom Baldock
What you do at Guill Tool?
My responsibilities here are for sales in the aerospace area. I’ve been in sales most of my adult life,...
