Thermal Processing Magazine

Oregon Products awarded Can-Eng Furnaces a contract to design and commission a heat-treatment system for Oregon’s production facilities. Oregon, a leading global manufacturer of saw chain and other replacement products for the forestry industry, plans to use the new continuous high-capacity mesh belt austemper heat-treat equipment as part of a long-standing commitment to continuous quality […]

Thermal Product Solutions, a global manufacturer of thermal-processing equipment, has shipped a Gruenberg steam-heated granulation dryer to the pharmaceutical industry. This dryer had a maximum temperature rating of 66°C with work chamber dimensions of 80” W, with two doorways, each 36” wide openings x 96” D x 80” H. The Gruenberg dryer was constructed from […]

Nitrex Metal Inc. supplied a nitriding system to Hydro Extrusion Solutions in Trzcianka, Poland, to address the customer’s need for improved process performance and more accurate control of nitriding results. The Nitrex N-EXT 812 nitriding system replaces a decommissioned nitrider that was phased out several years ago due to extrusion die failures and inconsistent metallurgical […]

No. 841 is a 650°F (343°C) universal oven from Grieve, currently used for a variety of heat-treatments at the customer’s facility. Workspace dimensions of this oven measure 36” W x 36” D x 36” H. 9 KW are installed in Incoloy-sheathed tubular heating elements, while a 600 CFM, 1/2 HP recirculating blower provides universal airflow […]

L&L Special Furnace Co., Inc., has shipped the fifth Model GS1714 furnace to a leading manufacturer of calcium phosphate materials used for medical devices. The calcium products are known as orthophosphates and contain a variety of chemical structures deployed in the medical and dental field. In slurry form, the calcium phosphate can be used on […]

Gasbarre Thermal Processing Systems recently manufactured and commissioned a large, gas-fired, continuous humpback stainless-steel sink annealing furnace for a worldwide manufacturer and distributor of stainless-steel sinks. The system was custom designed to meet the customer’s strict process requirements. The furnace measured a total length of 106 feet long with a belt width of 32 inches. […]

Gasbarre Thermal Processing Systems recently manufactured and commissioned a high temperature box furnace line for an aerospace company in the midwestern United States. The system is custom designed to meet the customer’s strict process requirements, manufacturing methods, and eliminates the need for a quench pit. The equipment will process 36” wide by 48” long by […]

Seco/Vacuum Technologies (SVT), a Seco/Warwick Group division, with its headquarters in Meadville, Pennsylvania, is working with a prominent aerospace equipment manufacturer to bring its low-pressure carburizing and hardening work in-house. SVT will be supplying its signature CaseMaster Evolution® (CMe) dual-chamber vacuum oil quench furnace to improve lead times and quality objectives. “We developed the CaseMaster […]

Premier/BeaverMatic spray/dunk washers were recently manufactured and shipped from Premier’s new manufacturing facility in Farmington Hills, Michigan. The repeat customer is an international aerospace firm, with a facility in the southeastern United States. The spray/dunk washers are designed to clean 1,250 pounds of heat-treated material, using both a full immersion oscillating dunk cycle, propeller agitation, […]

Thermal Product Solutions, a global manufacturer of thermal-processing equipment, is shipping a Blue M batch oven to a semiconductor manufacturing company. This Blue M batch oven has a designated temperature range of 15°C above ambient to 316°C. The interior of the work chamber has dimensions of 36 W x 36 D x 48 H. This […]

No fewer than three new products will be presented by Richard Geiss GmbH, Offingen (Bavaria), at the parts2clean 2019 trade fair October 22-24 in Stuttgart: the newly developed Cleanstab S stabiliser, the GEISS Digital Indexer and the RG PROTECT 160 corrosion protection concentrate. In addition to its latest innovations, the solvent specialist will also be […]

Wisconsin Oven Corporation has made an international shipment of an electrically heated heavy-duty Ferris wheel batch oven to the aerospace industry. This Ferris wheel oven will be used to cure epoxy resins and varnishes on assorted aerospace parts. The maximum operating temperature is 500°F and the work chamber dimensions are 3’4” W x 3’6” L […]

After breaking ground a little over a year ago, Allied Mineral Products’ current expansion includes a new manufacturing facility in Pell City, Alabama. When Allied purchased Riverside Refractories in 2017, they acquired two locations in Alabama — Anniston and Pell City. To better serve its local customer base in the southeast region, Allied combined both […]

Premier Furnace Specialists and BeaverMatic have completed a major $2.5 million building expansion at one of its Farmington Hills facilities. The expansion provides 45-foot high ceilings with two large (25-ton and 10-ton) overhead cranes to complement the existing two 10-ton overhead cranes. The total square feet under one roof is now 40,000. The expansion was […]

As a leader in the industry, the innovation team at Wisconsin Oven is focused on driving process and product development forward by using technological advancements in the industry. Its current initiatives range from advanced simulation programming technology to patents that will change the traditional way industrial ovens have been designed. Wisconsin Oven has been designing, […]

Seco/Warwick will present the innovative Super IQ® and UCM® 4D Quench® furnaces at two events — in Detroit, Michigan, and in Cologne, Germany. Both are in October. These furnaces are the symbol of a new era for the industry, as they eliminate everyday heat-treatment problems, becoming a modern and attractive alternative to traditional methods. The […]

Heat Treat 19, the biennial show from the ASM Heat Treating Society, is considered the premier, can’t-miss event for heat-treating professionals in North America. Heat Treat 19, the 30th Heat Treating Society Conference & Exposition, will be October 15-17 in Detroit, Michigan. This year’s conference and expo will feature a mix of new technology, exhibits, technical […]

Tenova, a Techint Group company specialized in innovative solutions for the metals and mining industries, was recently awarded three iRecovery® (intelligent waste heat recovery systems). Following the Consteel Evolution® commissioning, Tangshan Zhengfeng Iron & Steel Co., LTD, in Hebei Province, China, has decided to further invest in Tenova’s technology solutions. Tenova iRecovery systems will be […]