EDITOR PICKS

The future of vacuum oil quenching

July 15, 2024

The effect of heat treatment on a 3D-printed PLA polymer’s mechanical...

June 15, 2024

Optimal fabrication of a thin-film thermocouple using Alumel/Chromel junctions

May 15, 2024

Editor Picks

The importance of preventative maintenance

October 15, 2021

Finite element modeling and simulation of vacuum brazing processes

January 15, 2024

Maintenance Procedures for Vacuum Furnaces

October 29, 2012

Temperature uniformity survey ( TUS ) general practice for CQI-9 and AMS2750E

March 15, 2020

Understanding the Jominy end quench test

January 15, 2020

Troubleshooting and Prevention of Cracking in Induction Hardening of Steels: Lessons Learned –...

September 15, 2019

Heat Treatments and Critical Quenching Rates in Additively Manufactured Al–Si–Mg Alloys

July 15, 2020

Potential of nitrogen atomized alloy 625 in the powder bed fusion laser...

April 15, 2023

Austempering: An Old Process with New Potential for Gears

November 2, 2012

Popular Columns

Potential of nitrogen atomized alloy 625 in the powder bed fusion laser...

April 15, 2023

Selecting the right stretch forming equipment

October 15, 2023

Nitrogen gas quenching pressure effect on BS S155 alloy steel in...

July 15, 2024

2024 Annual Meeting was a success

Aqueous inorganic salt quenchants

Alessandra Palombi wins Aichelin Young Speaker Award

Inducing heat treatment for case hardening

Commercial Heat Treaters

Equipment

Marketplace

Services

Facebook icon

EDITOR PICKS

The future of vacuum oil quenching

The effect of heat treatment on a 3D-printed PLA polymer’s mechanical...

Optimal fabrication of a thin-film thermocouple using Alumel/Chromel junctions

Editor Picks

The importance of preventative maintenance

Finite element modeling and simulation of vacuum brazing processes

Maintenance Procedures for Vacuum Furnaces

POPULAR POSTS

Temperature uniformity survey ( TUS ) general practice for CQI-9 and AMS2750E

Understanding the Jominy end quench test

Troubleshooting and Prevention of Cracking in Induction Hardening of Steels: Lessons Learned –...

Popular Articles

Heat Treatments and Critical Quenching Rates in Additively Manufactured Al–Si–Mg Alloys

Potential of nitrogen atomized alloy 625 in the powder bed fusion laser...

Austempering: An Old Process with New Potential for Gears

POPULAR CATEGORY

Popular Columns

Potential of nitrogen atomized alloy 625 in the powder bed fusion laser...

Selecting the right stretch forming equipment

Nitrogen gas quenching pressure effect on BS S155 alloy steel in...